Appendix B Using SI_SCOPE in Windows 9x/ME

This section details specifics to running SI_SCOPE with SIDRVR under Windows 95, 98, and ME. When running under any of these platforms SI_SCOPE will use the 32 bit Windows VxD SIDRVR.386. The command line parameters to configure SI_SCOPE to bind to the VxD are handled by the program SCOPECFG.

Determining Your IO Address and IRQ

1. Double click on the "My Computer" icon on your desktop.
2. Double click on the "Control Panel" icon.
3. When inside Control Panel double click on the "System" icon.
4. From the "System Properties" dialog click on the "Device Manager" tab.
5. Double click on the "Ports (COM & LPT) icon.
6. Click on the port you want to use and then click the "Properties" button.
7. From the next dialog click on the "Resources" tab.
8. Note the values for the "Interrupt Request" and "Input/Output Range".